[PR]上記の広告は3ヶ月以上新規記事投稿のないブログに表示されています。新しい記事を書く事で広告が消えます。
Demand (tankless or instantaneous) water heaters are rated by the maximum temperature rise possible at a given flow rate. Faster flow rates or cooler inlet temperatures can sometimes reduce the water temperature at the most distant faucet.5 gallons (9. Therefore, to size a demand water heater, you need to determine the flow rate and the temperature rise you'll need for its application (whole house or a remote application, such as just a bathroom) in your home.
To reduce flow rates, install low-flow water fixtures. Most demand water heaters are rated for a variety of inlet temperatures.
For dishwashers without internal heaters and other such applications, you might want your water heated at 140ºF (60ºC). The flow rate through the demand water heater would need to be at least 3.
First, list the number of hot water devices you expect to use at any one time. To determine temperature rise, subtract the incoming water temperature from the desired output temperature. Then, add up Refrigeration Equipment their flow rates (gallons per minute).46 liters) per minute. Typically, a 70ºF (39ºC) water temperature rise is possible at a flow rate of 5 gallons per minute through gas-fired demand water heaters and 2 gallons per minute through electric ones.84 liters) per minute and a shower head with a flow rate of 2. In this example, you'd need a demand water heater that produces a temperature rise of 70ºF (39ºC) for most uses